🚧 Under construction — VoTechWorks is being built. Tuition is free for the first 150 students who sign up by October 31, 2026 — 150 seats left.
voTechWorksGrade 13 · a vocational technology learning center, by urbanicity
newSchoolWorks.com › VoTechWorks › Museum › Series D · Tools Through Time › The Tape Measure
Series D · Tools Through Time

The Tape Measure

Program: Construction (general)

Museum of VoTech · Tools Through Time

The Tape Measure

The Tape Measure — panel art

Before the tape: the cubit, the foot, the chain, the folding rule.

1620. Edmund Gunter's surveying chain: 66 feet, 100 links. Ten square chains make an acre.

1868. Alvin J. Fellows of New Haven patents a spring tape measure: a steel ribbon that winds itself back into a case.

1920s. A curved, concave blade stands out stiffly on its own; a lock holds it.

The hook. The loose hook on the end is not broken. It slides by exactly its own thickness so inside and outside measurements are both true.

The marks. Red numbers every 16 inches for stud layout; black diamonds at 19.2 inches for engineered joists.

Today. Laser distance meters measure a room in a second; the tape still reads the board.

Try it. Measure the same wall with a tape, a laser and a folding rule. Report your error.

Scan for the reading · newschoolworks.com/q/TZJQ3YQR code TZJQ3Y to the readingTZJQ3Y
36 × 48 in portrait · aluminum composite, UV print, matte laminate · 142 words — within the 250-word rule · status reading

The reading behind this panel

The DrillThe DroneThe HammerThe Lathe to CNCThe LevelThe SawThe SquareThe Tape MeasureThe TorchThe Transit to Total Station